How to maintain the digital printing machine-Company News-Shenzhen Batu Digital Technology Co., Ltd.

How to maintain the digital printing machine

2021-08-16(633)Views

Since the development of the digital printing industry, great progress has been made. Not only is the printing speed getting faster and faster, the printing accuracy is also getting higher and higher. It has also made great breakthroughs in high-penetration printing and reforming printing schemes. It can be said that whether it is in other countries in the world or in China, digital printing is forming a trend of the times, especially now that the environmental protection problem is getting more serious, and the advantages of digital printing over traditional printing are more obvious.

Therefore, the digital printing machine has become the sweet pastry of the printing and dyeing industry. Relatively speaking, the digital printing machine is a large part, and it is very valuable when it is purchased. Moreover, in the later application production, if it goes on strike, basically it can only stop production. How to maintain the digital printing machine and keep it in good working condition is particularly important.

一、 the maintenance of the nozzle
1, do not install and disassemble the digital printing circuit at will without turning off the power switch and cutting off the main power supply;
2, pay attention to the strength of your hands during the replacement and fine-tuning of the nozzle, and do not use brute force;
3, the nozzle should be cleaned regularly;
4, the ink sac should be replaced regularly, like Taito's 8-head machine, it needs to be replaced every 3 months;
5, do not mix two different inks during printing;
6, after the nozzle is disassembled, it should be cleaned up and placed in a special container to avoid dust and dirt from polluting it;
7, do not use too bad quality medium, if the medium is too bad, it is easy to damage the print head;

8, a test strip must be printed before each end of work, and ensure that all nozzles are inkjet normally, as a daily operation.

二、Maintain a clean environment　　

1, the room should be dust-proof, not placed in an environment prone to smoke and dust, and the floor should be cleaned with a vacuum cleaner;

2, try to maintain a constant temperature and humidity environment, under normal circumstances, the temperature is around 25 degrees, and the humidity is around 60%;
3, keep the surface of the machine empty and not place any objects, especially liquids;

4. There should be no commonly used household appliances near the machine, and it should be far away from large magnetic fields and electric fields.

三、Maintenance and maintenance of machine parts
1, some important parts and components need to be overhauled and maintained regularly, and if they are worn out and replaced, they should be repaired in time;

2, develop a good habit of daily inspection, pay attention to the printing effect when printing, and solve problems in time.

Digital printing has been in development for more than 20 years, but it has only been a short period of 2-3 years in recent years that high-speed digital printing machines have really begun to be accepted by the market. For digital printing technology, now is the breakthrough period of rapid technological development, and the joint efforts of nozzles, inks, and machinery are needed to accelerate the maturity and leap of technological improvement. Like the newly listed Tiancai 200㎡/h six-head machine and Taito Technology's 280㎡/h eight-head machine on the market, the price of this high-speed digital printer is relatively high, and it is basically suitable for large-scale mass production. Once an industrial printer is put into production, the task it shoulders is to print for dozens of hours and thousands of kilometers. Therefore, the maintenance of the machine on weekdays should be paid more attention.

<Maintenance skills of digital printing machine What is the difference between digital printing machine and traditional printing machine> backtrack